The ADAPT 2 Series products are double pronged adaptors in various heights for different platforms or applications. The ADAPT 2’s are ideal for angling pouches to the end-user’s preference. One side has 2 slick forks for mounting to MOLLE vests or belts, and even over non-MOLLE belts in some circumstances. The other side has holes for mounting a screw-on pouch. The bottom secures with screws, rubber spacers, and T-Posts.
The heights are specific to what you want to mount and the item you want to mount it to.
The ADAPT 2 MICRO is 1.75” height, typically used in micro MOLLE belts but also found in some pouch configurations. If you are running a 1.75” belt, you want the ADAPT 2 MICRO.
The ADAPT 2 SHORT is 2” height, typically used in duty belts or common MOLLE belts. It is also able to mount on any laser cut MOLLE areas where items can mount on a 2” space. If you are running a 2” belt, you want the ADAPT 2 SHORT.
The ADAPT 2 Series products are made out of .9mm CURV® material and are compatible with:
Blade-Tech® Tek-Lok® hole patterns
Safariland QLS, ELS, and standard hole patterns
Blackhawk belt clips and hole pattern
The ADAPT 2 REGULAR, ADAPT 2 DUTY and ADAPT 2 SHORT sizes come with:
1 x Adaptor
4 x 1/4” Screws
4 x 1/8” Rubber Spacers
4 x 3/8” Slotted Binding Post (Short T-Post)
The ADAPT 2 MICRO size comes with:
1 x Adaptor
4 x 1/4” Screws
4 x 1/8” Rubber Spacers
4 x 3/8” Slotted Binding Post (Short T-Post)
2 x Black Oxide Steel Flat Washers
*Guardian Warrior Solutions does not recommend using the ADAPT Series to mount a firearm (See Bang Hanger). If a user chooses to mount less lethal items using the ADAPT 1 Series, Guardian Warrior Solutions is not responsible for any negative outcomes associated.
*We recommend using the included thread locker on all included hardware.
The ADAPT 2 Series products are double pronged adaptors in various heights for different platforms or applications. The ADAPT 2’s are ideal for angling pouches to the end-user’s preference. One side has 2 slick forks for mounting to MOLLE vests or belts, and even over non-MOLLE belts in some circumstances. The other side has holes for mounting a screw-on pouch. The bottom secures with screws, rubber spacers, and T-Posts.
The heights are specific to what you want to mount and the item you want to mount it to.
The ADAPT 2 MICRO is 1.75” height, typically used in micro MOLLE belts but also found in some pouch configurations. If you are running a 1.75” belt, you want the ADAPT 2 MICRO.
The ADAPT 2 SHORT is 2” height, typically used in duty belts or common MOLLE belts. It is also able to mount on any laser cut MOLLE areas where items can mount on a 2” space. If you are running a 2” belt, you want the ADAPT 2 SHORT.
The ADAPT 2 Series products are made out of .9mm CURV® material and are compatible with:
Blade-Tech® Tek-Lok® hole patterns
Safariland QLS, ELS, and standard hole patterns
Blackhawk belt clips and hole pattern
The ADAPT 2 REGULAR, ADAPT 2 DUTY and ADAPT 2 SHORT sizes come with:
1 x Adaptor
4 x 1/4” Screws
4 x 1/8” Rubber Spacers
4 x 3/8” Slotted Binding Post (Short T-Post)
The ADAPT 2 MICRO size comes with:
1 x Adaptor
4 x 1/4” Screws
4 x 1/8” Rubber Spacers
4 x 3/8” Slotted Binding Post (Short T-Post)
2 x Black Oxide Steel Flat Washers
*Guardian Warrior Solutions does not recommend using the ADAPT Series to mount a firearm (See Bang Hanger). If a user chooses to mount less lethal items using the ADAPT 1 Series, Guardian Warrior Solutions is not responsible for any negative outcomes associated.
*We recommend using the included thread locker on all included hardware.
