The ADAPT 1 Series products are single pronged adaptors in various heights for different platforms or applications. One side is slick for mounting to MOLLE vests or belts, and even over non MOLLE belts in some circumstances. The other side has slots for mounting a screw-on pouch. The ADAPT 1 Series can also be used to mount MOLLE pouches to MOLLE platforms. The bottom secures with a screw, rubber spacer, and a T-Post.
The heights are specific to what you want to mount and the item you want to mount it to.
The ADAPT 1 MICRO is 1.75” height, typically used in micro MOLLE belts but also found in some pouch configurations. If you are running a 1.75” belt, you want the ADAPT 1 MICRO.
The ADAPT 1 SHORT is 2” height, typically used in duty belts or common MOLLE belts. It is also able to mount on any laser cut MOLLE areas where items can mount on a 2” space. If you are running a 2” belt, you want the ADAPT 1 SHORT.
The ADAPT 1 Series products are made out of .9mm CURV® material and are compatible with:
Blade-Tech® Tek-Lok® hole patterns
Safariland QLS, ELS, and standard hole patterns
Blackhawk belt clips and hole pattern
Every ADAPT 1 size comes with:
1 x Adaptor
3 x 1/4” Screws
3 x 1/8” Rubber Spacers
3 x 3/8” Slotted Binding Post (Short T-Post)
2 x Black Oxide Steel Flat Washers
*Guardian Warrior Solutions does not recommend using the ADAPT Series to mount a firearm (See Bang Hanger). If a user chooses to mount less lethal items using the ADAPT 1 Series, Guardian Warrior Solutions is not responsible for any negative outcomes associated.
*We recommend using the included thread locker on all included hardware.
The ADAPT 1 Series products are single pronged adaptors in various heights for different platforms or applications. One side is slick for mounting to MOLLE vests or belts, and even over non MOLLE belts in some circumstances. The other side has slots for mounting a screw-on pouch. The ADAPT 1 Series can also be used to mount MOLLE pouches to MOLLE platforms. The bottom secures with a screw, rubber spacer, and a T-Post.
The heights are specific to what you want to mount and the item you want to mount it to.
The ADAPT 1 MICRO is 1.75” height, typically used in micro MOLLE belts but also found in some pouch configurations. If you are running a 1.75” belt, you want the ADAPT 1 MICRO.
The ADAPT 1 SHORT is 2” height, typically used in duty belts or common MOLLE belts. It is also able to mount on any laser cut MOLLE areas where items can mount on a 2” space. If you are running a 2” belt, you want the ADAPT 1 SHORT.
The ADAPT 1 Series products are made out of .9mm CURV® material and are compatible with:
Blade-Tech® Tek-Lok® hole patterns
Safariland QLS, ELS, and standard hole patterns
Blackhawk belt clips and hole pattern
Every ADAPT 1 size comes with:
1 x Adaptor
3 x 1/4” Screws
3 x 1/8” Rubber Spacers
3 x 3/8” Slotted Binding Post (Short T-Post)
2 x Black Oxide Steel Flat Washers
*Guardian Warrior Solutions does not recommend using the ADAPT Series to mount a firearm (See Bang Hanger). If a user chooses to mount less lethal items using the ADAPT 1 Series, Guardian Warrior Solutions is not responsible for any negative outcomes associated.
*We recommend using the included thread locker on all included hardware.
